View DWY-EJS-X2_1235353.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DOMINANT
Semiconductors
Innovating Illumination
TM
DATA SHEET:
Power DomiLEDTM
AlInGaP : DWx-EJS
Power DomiLED
TM
With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLEDTM truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals.
Features:
> > > > > > High brightness surface mount LED using thin film technology. 120 viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance.
Applications:
> Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), Display: full color display video notice board. Industry: white goods (eg: Oven, microwave, etc.). Lighting: architecture lighting, general lighting, garden light, etc
> > >
(c) 2005 DomiLED is a trademark of DOMINANT Semiconductors. All rights reserved. Product specifications are subject to change without notice.
1
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Part Ordering Number
DWS-EJS-VW1-1 * DWS-EJS-V1 * DWS-EJS-V2 * DWS-EJS-W1 DWR-EJS-VW1-1 * DWR-EJS-V1 * DWR-EJS-V2 * DWR-EJS-W1 DWA-EJS-V2W-1 * DWA-EJS-V2 * DWA-EJS-W1 * DWA-EJS-W2 DWA-EJS-W2X-1 * DWA-EJS-W2 * DWA-EJS-X1 * DWA-EJS-X2 DWO-EJS-V2W-1 * DWO-EJS-V2 * DWO-EJS-W1 * DWO-EJS-W2 DWO-EJS-W2X-1 * DWO-EJS-W2 * DWO-EJS-X1 * DWO-EJS-X2 DWY-EJS-V2W-1 * DWY-EJS-V2 * DWY-EJS-W1 * DWY-EJS-W2 DWY-EJS-W2X-1 * DWY-EJS-W2 * DWY-EJS-X1 * DWY-EJS-X2
Chip Technology / Color
AlIGaP Super Red, 632nm
Viewing Angle
120
Luminous Flux @ IF = 50mA (mlm)
2145.0 - 4200.0
Luminous Intensity @ IF = 50mA IV (mcd)
715.0 - 1400.0 715.0 - 900.0 900.0 - 1125.0 1125.0 - 1400.0
AlIGaP Red, 625nm
120
2074.0 - 4060.0
715.0 - 1400.0 715.0 - 900.0 900.0 - 1125.0 1125.0 - 1400.0
AlIGaP Amber, 615nm
120
2340.0 - 4680.0
900.0 - 1800.0 900.0 - 1125.0 1125.0 - 1400.0 1400.0 - 1800.0
3640.0 - 7410.0
1400.0 - 2850.0 1400.0 - 1800.0 1800.0 - 2240.0 2240.0 - 2850.0
AlIGaP Orange, 605nm
120
2340.0 - 4680.0
900.0 - 1800.0 900.0 - 1125.0 1125.0 - 1400.0 1400.0 - 1800.0
3640.0 - 7410.0
1400.0 - 2850.0 1400.0 - 1800.0 1800.0 - 2240.0 2240.0 - 2850.0
AlIGaP Yellow, 587nm
120
2250.0 - 4500.0
900.0 - 1800.0 900.0 - 1125.0 1125.0 - 1400.0 1400.0 - 1800.0
3500.0 - 7125.0
1400.0 - 2850.0 1400.0 - 1800.0 1800.0 - 2240.0 2240.0 - 2850.0
NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf bining is also available upon request. Bining scheme is as per following table. 5. Data provided for luminous flux is based on approximation.
2
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Wavelength Grouping
Color Group Wavelength distribution (nm)
DWS; Super Red DWR; Red DWA; Amber
Full Full Full W X
625 - 640 620 - 630 610 - 621 610 - 615 615 - 621 600 - 612 600 - 603 603 - 606 606 - 609 609 - 612 585 - 594 585 - 588 588 - 591 591 - 594
DWO; Orange
Full W X Y Z
DWY; Yellow
Full X Y Z
Dominant wavelength is measured with an accuracy of 1 nm.
Electrical Characteristics at Ta=25C
Part Number
DWx-EJ
Vf @ If = 50mA Min. (V)
2.0
Vr @ Ir = 10uA Max. (V)
2.8
Typ. (V)
2.2
Min. (V)
12
Forward voltages are measure using a current pulse of 1 ms and with an accuracy of 0.1V.
Vf Bining (Optional)
Vf @ If = 50mA
51 52 53
Forward voltage, Vf is measured with an accuracy of 0.1V. Please consult sales and marketing for special part number to incorporate Vf binning.
Forward Voltage (V)
2.0 ... 2.3 2.3 ... 2.6 2.6 ... 2.9
3
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Absolute Maximum Ratings
Maximum Value
DC forward current Peak pulse current; (tp 10s, Duty cycle = 0.005) Reverse voltage ESD threshold (HBM) LED junction temperature Operating temperature Storage temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 300 130 K/W K/W 70 100 12 2000 125 -40 ... +100 -40 ... +100 200
Unit
mA mA V V C C C mW
Characteristics (Ta = 25C)
Symbol
Temperature coefficient of dom (typ) IF = 50mA; 0 C <= T <= 100 C TC dom (typ)
Part Number
DWS-EJS DWR-EJS DWA-EJS DWO-EJS DWY-EJS
Value
0.05 0.05 0.07 0.07 0.09 -2.2 -4.8 -2.4 -1.2 -1.3 -6.0 -7.4 -11.5 -15.7 -19.0
Unit
nm / K
Temperature coefficient of VF (typ) IF = 50mA; 0 C <= T <= 100 C
TCV
DWS-EJS DWR-EJS DWA-EJS DWO-EJS DWY-EJS
mV / K
Temperature coefficient of IV (typ) IF = 50mA; 0 C <= T <= 100 C
TCIV
DWS-EJS DWR-EJS DWA-EJS DWO-EJS DWY-EJS
mcd / K
4
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Relative Luminous Intensity Vs Forward Current
Relative Intensity Relative Intensity; Normalized at 50mA
1.6 1.4
Forward Current Vs Forward Voltage
2.3
1 0.8 0.6 0.4 0.2 0 0 10 20 30 40 50 60 70 80
Forward Voltage, V
1.2
2.2
2.1
2
1.9
1.8 0 20 40 60 80
Forward Current, mA
Forward Current, mA
Maximum Current Vs Temperature
Allowable Forward Current, mA
0 10 20 30 40 50 60 70 80 90 100 80 70
Allowable Forward Current Vs Duty Ratio Allowable Forward Current Vs Duty Ratio (Ta=25 Deg C, Tp<10us)
1000
Forward Current, mA
60 50 40 30 20 10 0
100
10
1 1 10 100
Ambient Temperature
Duty Ratio, %
Radiation Pattern
30 20 10 0
1.0
40
0.8
50
0.6
60 70 80 90
0.4
0.2
0
5
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
DomiLED * AllnGap : DWx-EJS Package Outlines
TM
6
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Recommended Solder Pad
7
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Taping and orientation
* Reels come in quantity of 2000 units. * Reel diameter is 180 mm.
8
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Packaging Specification
9
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT Semiconductors
LOT NO : lotno
ROHS Compliant PB Free
S/N : xxx D/C: xxxx
PART NO : partno QTY : qty GROUP : group
Reel Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag
Average 1pc Power DomiLED
Weight (gram) Weight (gram) 0.034 0.034
1 completed bag (2000pcs)
190 10 190 10
DOMINANT TM
Semiconductors
Cardboard Box
For Power DomiLED
Cardboard Box Size
Small Large
TM
Dimensions (mm)
Empty Box Weight (kg)
0.58 1.74
Reel / Box
Quantity / Box (pcs)
300 x 250 x 250 416 x 516 x 476
15 reels MAX 55 reels MAX
30,000 MAX 110,000 MAX
10
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Recommended Sn-Pb IR-Reflow Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
275 250 225 200 Ramp-up 3C/sec max. 235-240C 10-30s
Temperature (C)
175 150 125 100 75 50 25 0 50 100 150 200 Preheat 60-120s 360s max Rampdown 6C/sec max. 183C 60-150s
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300 275 250 225 217C Ramp-up 3C/sec max. 255-260C 10-30s
Temperature (C)
200 175 150 125 100 75 50 25 0 50 Preheat 60-180s 480s max 100 150 200 Rampdown 6C/sec max. 60-150s
Time (sec)
11
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
Revision History
Page 2 Subjects New Format Add New Part Number : DWO-EJS-V2W-1 DWO-EJS-W2X-1 DWA-EJS-W2X-1 DWY-EJS-W2X-1 - Add Thermal Resistance - Add Characteristics table Add Allowable Forward Current Vs Duty Ratio Graph Date of Modification 29 Sept 2005 03 Jan 2007
4 5
25 June 2007 25 June 2007
NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Semiconductors.
12
25/06/2007 V5.0
DOMINANT TM
Semiconductors
Innovating Illumination
AlInGaP : DWx-EJS
About Us DOMINANT Semiconductors is a dynamic Malaysian Corporation that is among the world's leading SMT LED Manufacturers. An excellence - driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT's extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT's state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Semiconductors can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information: Head Quarter DOMINANT Semiconductors Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: sales@dominant-semi.com
DOMINANT China Sales Office DOMINANT Semiconductors (Shenzhen) Co. Ltd. 24BC Newbaohui Building, No. 1007 West Nanhai Blvd., Nanshan, Shenzhen, China P.C. 518054 Tel: +86 (755) 86031785 / +86 (755) 86031786 Fax: +86 (755) 86031789 E-mail: sales_china@dominant-semi.com
DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. 902 Sunil Technopia, 440 Sangdaewon-dong, Jungwon-gu, Sungnam-si, Kyunggi-do, Korea 462726 Tel: 82-31-777-3978 Fax: 82-31-777-3976 E-mail: sales_korea@dominant-semi.com
DOMINANT
Semiconductors
Innovating Illumination
TM

▲Up To Search▲

Price & Availability of DWY-EJS-X2

	To Download DWY-EJS-X2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .